Dell computer monitors are great for watching movies and video games.
But for most people, they are only a decent monitor for watching YouTube videos.
So we decided to upgrade the mount on our Dell computer and upgrade to a Dell display.
Here’s how to do that.1.
Connect your computer to your Dell computer.2.
Click on the “Network” tab at the top of the screen.3.
Click “Change Network” and follow the on-screen instructions.4.
Click the “Display Network” tab to enter your network information and choose the monitor mount option.5.
If you need help connecting your computer and the mount, check out our guide to connecting to a display using a cable.1/ Install the Dell monitor mount software.2/ Click on “Network”.3/ Click “Settings”.4/ Click the icon that says “Advanced Networking”.5/ Click OK.
The Dell display mount software will now install.
Once installed, you can use the mount to watch YouTube videos, check emails, view calendar appointments, browse your email inbox, and much more.
It’s a good idea to disable the mount at this point.
It is possible to manually restart your computer when the mount is not running.1.)
Mount the Dell Computer Monitor Mount on the Dell Display.
To use the Dell mount to your display, we will need to install the Dell display drivers.
This can be done through the Dell installation program or through Dell’s website.1) Click on Dell Installation Tools.2) Select Dell Display Drivers.3) Click Install.4) Select the Dell drivers.5) Click OK and close.
The display drivers are installed.
If you are not prompted to reboot after installing, skip to Step 3.1).
Connect your Dell Computer to your Display.
Step 1: Configure Your Dell Display1.
Turn on your display.2.)
Press the power button on the left side of your Dell monitor.3.)
At the top right corner of your display you will see a button called “Power” and a little arrow icon.4.)
Hold down the Power button for 5 seconds and wait until your display goes back to its normal brightness.5.)
Press and hold the power on the right side of the display until you see a green bar at the bottom of the right screen.6.)
Click the power icon on the top left corner of the monitor.7.)
Click “Connect” to connect your Dell display to your computer.8.)
The Dell display driver will now be installed on your computer, but there will be no warning about the display drivers on the system tray.1 / Install the DLP mount software from Dell’s webpage.2 / Click on Display Mount Software.3 / Click “Setup” and select Dell Display Mount.4 / Click OK, then click “Start”.5 / Click the Dell logo to start the setup.6 / Click Finish to close the Setup wizard.1): Configure the Dell Mount.1A) Turn on the display.1B) Press and release the Power key.2C) Click the Power icon on your left side.3D) Click “Display” and press the Power Button.4E) At the bottom right corner, you will find the DLL icon.5F) Press the “Power on” button on your right side and wait for your display to power on.6G) Press both the Power and “Connect to Display” buttons on your monitor.1H) Click and hold down the “Volume Down” button at the same time to enter a boot menu.7I) At this point you will notice that the “Dell” logo is on your Dell Display, but the Dell icon on top of your monitor is not.1K) Press “Power”, then “Volume Up” to reboot the system and enjoy your new Dell monitor mounted to your desktop.